Electromagnetic flow meter type IZMAG™

completely made from stainless steel

 
The electromagnetic flow meter, type IZMAG™, is suitable for metering both the flow rate and the volume of all kinds of liquids that have a minimum conductivity of 5 µS/cm. The IZMAG™ is completely made from stainless steel and it is anyway equipped with a display unit, immaterial of the device version preferred. A built-in Bluetooth interface even permits a wireless communication with the metering device.
 
Pulse outputs and an analog output are always available. Actions and processes can be controlled via a digital input. The IZMAG™ can be delivered either in an all-in-one version or with “discrete” signal transmitter and electronics box.
 
Technical data:
 
Supply voltage
9 ... 32 V DC
Display
Graphic LCD, 46x23 mm, illuminated
-     or
100 ... 240 V AC
Operation
3 contactless keys
Electrical power
7 watts
Language
Multilingual, reversible
Protection class
IP 67
Pulse output
Volume, optocoupler 24V/20mA
Housing material
1.4404 / AISI 316 L
Status output
Ready, malfunction or direction
Liner material
PFA
Control input
Optocoupler 9 ... 32 V DC
Pipe connection
Aseptic flange
Flow output
(0)/4 – 20 mA, active or passive
Fitting position (DN50)
104 mm
Interface
RS485/BUS connection
Nominal widths
DN 10 ... DN 150
Radio communication
Bluetooth / class 2
Flow range
20 L/h ... 1,200 m³/h
Ambient temperature
-25 ... +55°C
Pipe adapter (optional)
Milk pipe, clamp, DIN flange, etc.
Temperature
(all-in-one version)
Permanent temperature: 100°C max.
CIP temperature: 130°C for 30 min.
Pressure range
0.1 ... 11 bar abs.
Temperature (discrete version)
Permanent temperature: 165°C max.
Typical measuring accuracy
+/-0.2%
 
CE-compliant with OIML-R117-1
 
 
 
Other features:
  • The parameters of the flow meter can be set without opening the housing.
  • Both the “quick-start” function and the language change-over offer a simple and user-friendly parameter setting.
  • The display can be turned into different directions, always keeping its good readability.
  • Plain text messages and graphics display of the flow profile are helpful for commissioning.
  • The automatic change of the measuring range enables measurements even at high flow rates.
  • The electronics are continuously monitored and if necessary recalibrated by the high-stable “IN-CAL” module.  
  • The integrated empty-pipe detector avoids undefined counting actions in case of empty pipelines.
  • At a suddenly caused vacuum, the liner will keep stable even at high temperatures.
  • A bidirectional flow measurement is possible.
  • The IZMAG™ can be used in metering units subject to the Weights and Measures approval according to the European MID directive. 

For additional information to the electromagnetic flow meter type IZMAG™ please refer to data sheet D7626-00en_IZMAG-compact and D7626-01en_IZMAG-separated (Download).

Download document in PDF-format
Click anywhere in this box to view and/or download the document in Adobe PDF format.